Skip to Content

DIY Towel holder

diy towel holder

With five of us using the bathroom, we needed some extra space to hang towels. I found this idea on Bloesem Living, Irene made ​​accessories displays for her shop using dowels and leather straps. It’s the perfect solution for a towel holder too. What I did instead of using new leather, I recycled a belt.

Con cinco personas usando en el baño, necesitábamos espacio adicion al para colgar las toallas. Encontré esta idea en Bloesem Living, Irene hizo exhibiciones de accesorios para su tienda con palos y correas de cuero. Es la solución perfecta para colgar toallas. Lo que hice en lugar de usar cuero nuevo, reciclé un cinturón.

recycled belt to make towel holder

How to make DIY towels holder

Material you will need to make your towels bars:

  • Two wooden dowels (1′ diameter)
  • an old leather belt
  • screws 
  • a sew
  • a drill

Materials que vas a necesitar: dos palos (2,5 cm de diámetro), un cinturón de cuero viejo, tornillos y taquetes, una segueta y un taladro.

Tu vas avoir besoin de: deux bâtons (2.5 cm de diamètre), une vieille ceinture en cuir, des vis et chevilles, une scie et une perceuse.

make towel holder in 5 minutes

Cut the belt in (4) equal straps and make a hole at each end (to pass a screw). Make two holes in the wall at the same height and at a distance equal to the length of the dowels minus 8′. Insert plugs and tighten the leather strap on the wall. Slide the dowels into the belt loops and finished! I thought of gluing the wood dowels inside the leather straps, but it works fine without.

Corta el cinturón en (4) tiras iguales y haz un agujero en cada extremo (para pasar un tornillo). Haga dos agujeros en la pared a la misma altura y a una distancia igual a la longitud del palo menos 20 cm . Introduzca los taquetes y atornilla las tiras en la pared. Deslice los palos, y listo! Había pensado pegar los palos dentro de las correas de cuero, pero funciona bien sin nada.

Coupe la ceinture en (4) lanières égales et fait un trou à chaque extrémité (pour pouvoir passer une vis). Faire deux trous dans le mur à la même hauteur et à une distance égale à la longueur du bâton moins 20 cm. Mettre les chevilles et visser les lanières de cuir dans le mur. Glisser les bâtons, et terminé! J’avais pensé coller les bâtons à l’intérieur des lanières de cuir, mais ça fonctionne bien sans.

easy to make towel holder

And done! It’s a super easy and cheap DIY to make. Would you give a try? Don’t hesitate to share your make in the comments.

homemade towel holder diy

 

 

You will find all the tutorials featured in the video on my “Best DIY” page.

Amaryllis

Karen

Wednesday 2nd of May 2018

Can you think of a way that this could be done without putting holes in the walls from the screws? I am concerned about leaving holes in my rental room.

Joe Cool

Tuesday 19th of November 2019

If you use the hooks that only leave a pin hole, you can fill in the hole by rubbing a bar of soap across the hole when you move.

Joe Cool

Tuesday 19th of November 2019

Yes, you could use those picture hangers that leave only a pin hole and yet hold heavy art. Usually this type of hole is acceptable in rental situations, and certainly very easy to paint over when you leave. Or, use command hooks on the wall; be sure to choose the 25lb or more rated type. Attach a loop type fastener to the back of the belt pieces that is big enough to go on the command hook. Add something like a faux leather rose or corbel to loop around the command hook to cover it from view.

amaryllis

Thursday 3rd of May 2018

Maybe nail glue? But I'm not sure it will be strong enough to hold wet towels...

Unknown

Saturday 14th of May 2016

Awesome

ruchi750

Monday 28th of December 2015

Hey! Where did you get the sticks from?

Ama Ryllis

Monday 28th of December 2015

Hello, I found them at Home depot.

Curly Made

Tuesday 25th of February 2014

Love your blog, your ideas are amazing, great job :)

curlymade.blogspot.pt/

Bliss

Friday 21st of February 2014

As someone who has repurposed belts into things like drawer pulls, this is another fun idea. Way to be thinking!